Setup Your Rockspace Extender On Re.Rockspace.Local

Everyone nowadays is used to high speed internet and it gets on your nerves if the internet speed drops or is not stable. So, there comes the rockspace extender in the scene. The rockspace extender increases the internet speed and provides stability to your internet connection. It boosts the signals automatically. For that, you have to set up the rockspace wifi extender. You can visit the re.rockspace.local for rockspace extender setup. But, here in this article also we will discuss the easy steps to setup the rockspace wifi extender.

Step-By-Step Guide To Setup Rockspace Wifi Extender:

1. Firstly, set Rockspace WIFI Extender’s position:

Before beginning with the setup process of your Rockspace WIFI extender, ensure you choose a suitable location for it. Place the range extender to the wireless network of your home router, set it at perfect position.The most appropriate position of your Rockspace extender has to be somewherein the middle of your WiFi router and the device you want network connection on.

• Ensure that the wireless range extender is inside the wireless scope of the Wifi router or modem.
• The way the extender is set up, the same way your rockspace extender has to be  set up as an access point.
• Next, you will directly connect the extender with the wifi router with the help of an ethernet cable, that is the only difference between the setup of an extender and setting up of a rockspace extender on access point mode.
• It is believed that a wired connection is more speedy than a wireless connection.
• In short, setting up your wireless range extender ensures improved speed and range.

2. Secondly, Setup Rackspace WIFI Repeater as an Access Point

• Ensure the Ethernet cable you are using to connect is long enough to reach the place where you are placing the range extender.
• After that, you have to plug in your wireless range extender into the wall outlet.
• Now, wait until the power LED light turns solid.
• Then, use an Ethernet cable and attach to your extender’s LAN port.
• Now, Use your configuration devices, such as a computer, laptop, or mobile, and look for the available WIFI network at your home.
• Now, in the enlisted wifi names, you will see your WIFI name as “Rockspace extender”. This is the factory default name for your rockspace_EXT.
• Now, connect your device to the shown network and then launch a web browser.
• Now in the URL field, enter re.rockspace.local and tap on the enter button to proceed further.
• Finally, you just have to follow the on-screen prompts now to complete the setup of your wireless range extender in Access Point Mode.

3. Thirdly, Set up The Rockspace WIFI Extender through a Web browser

A. Establish a Connection between the Rockspace Extender and Computer

• Initially, to set up your Rockspace WIFI range extender using a web browser, you must connect it to the wifi router’s LAN network.
• Then, plug in your wireless range extender in a power outlet and switch it on.
• After that, switch on your computer.
• Next, you will see a WIFI icon that appears on your computer screen and click on it.
• Once you click on the WIFI button, the network name of your wireless range extender will appear on your screen, click on it.
• Now, you have to fill in your password for your wireless range extender.
• As you fill it in, your extender is connected with the computer.

B. Login your Credentials into Rockspace WIFI Extender

Before logging in to the Rockspace WIFI extender setup page, make sure the extender is properly connected to the computer or not. Then ensure that your computer should be connected to the available internet network. Once, you have ensured all connections move forward with;

• Initiate by launching an internet browser or a search engine on your PC device.
• Now, type in the web address ‘Re.rockspace.local login‘ or the IP address ‘192.168.0.254’ into the URL field of the web browser.
• Then, press the enter key.
• In case it is your first login, you will see a pop-up asking for the default username and password of your wireless range extender.
• Then, type in ‘Admin’ in the username box as SSID and password in the password box as security paraphrase.
• If you are already signed in, type the username ID and security password.
• The paraphrase ‘Admin’ is the default username ID, and admin is also the default login password.
• If this is not your first login, then you might have a username and password that will be your custom passphrase.

Setup Complete!

So, now you have completed your Rockspace Extender Setup successfully. This blog explains the setup to the ones who are using it for the first time. But, if you are not a new user then, you can directly visit the re.rockspace.local and fill in the information they ask adn set up your wifi extender. Also, you can contact us on our toll-free number in case you need help with anything else.