Rockspace WiFi Extender Setup Using re.rockspace.local

Got yourself one of the best extenders available in the market. Indeed Rockspace extenders are in hype these days. But, you might be wondering how to set the extenders up for use. Well, it is not much of a puzzler with the right guide in hand. We will give you the right guide to set up your Rockspace wifi extender. You can easily set up your rockspace wifi extender by visiting the site re.rockspace.local. It is an offline web page used to make configuration settings of your extender. From login settings to network or firmware settings you can manage anything by logging into re.rockspace.local. Let’s see how to set up the extender via re.rockspace.local.

Steps To Set Up Rockspace WiFi Extender Via re.rockspace.local:

  • Start by connecting your wireless compatible device to the Rockspace wifi network which might be available by the name, Rockspace_Ext.
  • Once you have successfully connected to the wifi network, launch the web browser you use the most.
  • In the web address bar enter re.rockspace.local or you can also enter 192.168.0.254 in case re.rockspace.local doesn’t open.
  • To proceed, create a log-in password for your rockspace wifi extender.
  • This will now scan all the available networks in your area, choose the one whose range you want to extend.
  • Then type in the password for your prime wifi, the one you have been using for your wifi router.
  • It is totally up to you to change the wifi network’s SSID. 
  • Once the setup is complete it will prompt you with the message, ‘Extended Successfully.
  • The blue LED light indicator indicates proper connection, whereas the red LED light indicator indicates the possibility of a better connection.
  • Move it closer to ensure the connection is proper and the blue LED light is lit. 

Steps To Set Up Rockspace WiFi Extender Via WPS button:

  • Just wait for the power light to turn solid because that indicates your wifi extender is turned on. 
  • Then, hit the WPS push button on your rockspace wifi extender.
  • Within the next two minutes, hit the WPS push button on the wifi router as well. 
  • If the light indicator on the extender is solid then, it implies the connection is proper.
  • Reset the wifi extender in case it doesn’t get started.
  • To make the WPS settings, you can also, do the following;
  • Navigate to the router’s web page.
  • Then look for the settings and click on that. 
  • Choose the WPS option, and enable it.
  • Finally, just detach the plug and attach it within the range of the wifi router.

Re.rockspace.local Is A Wizard!


With the help of re.rockspace.local you will be able to set up your rockspace wifi range extender. The steps are very easy and less time taking. In case you have some issue with accessing the offline webpage, try logging into the extender settings via IP address 192.168.0.254. This is a default IP address for configuring the settings on your wifi range extender. You can now enjoy the fast-speed internet with just a few simple steps. If you have any other issues with logging into the re.rockspace.local or the IP address, contact us for further technical assistance. We will be delighted to help you with the best solution. Contact us on the phone number mentioned on our website for any assistance.

Location: New York, NY, USA

Comments

Post a Comment

Popular posts from this blog

Fascinating User Guide for Re.rockspace.local Setup Using the Web Interface

Image
  With so much development in the technology, several updates have been made in the extender that makes it better than before. Rockspace WiFi range extender is one of the ultimate extenders that comes with various models and speed. It is the device that helps you in extending the existing WiFi network and increase the WiFi range in the host WiFi network where they can’t reach. If you already purchased a Rockspace WiFi range extender and are looking for a simple user manual guide to setup your extender using re.rockspace.local without any network glitch then this blog will be helpful for you. There are two ways to set up the Rockspace WiFi range extender i.e. web interface and WPS button. In both ways, you need to be available physically near the local Rockspace signal booster to connect the existing host WiFi network. Let’s keep reading and know the steps to rockspace setup .  Guidelines for Rockspace Range Extender Setup Using Web Interface  For Rockspace WiFi range extender setup, y
Read more

Ultimate Guide for Users for Rockspace Extender Setup

Image
  Want to configure your Rockspace extender according to your desire? Well, after Rockspace extender setup , you can easily log into your extender and can make the changes into it depending on your needs. If you don’t know how to set up and login into your Rockspace range extender then this blog will help you. In this blog, we have discussed the simple and easiest guidelines on how to perform Rockspace Range Extender Setup on your device and login with the existing WiFi network. Scroll down and check out the steps to login to the Rockspace extender without facing any error.  Instructions for Rockspace Extender Setup Using the Ethernet Cable Look at the below instructions for setting up the Rockspace WiFi range extender using the Ethernet cable: Step 1: The first step is to connect the Rockspace WiFi extender to your computer or laptop using the Ethernet cable. Step 2: After that, launch the internet browser from your system. Thereafter, enter the login address of the Rockspace range e
Read more

Easy Guide To Rockspace WiFi Extender Setup

Image
Rockspace Wifi extender does a pretty good job in increasing the wifi strength and speed. To have the privilege of high-speed internet you have to do the Rockspace wifi extender setup . The Rockspace setup is not complicated. In this article, we will explain to you how you can make the Rockspace wifi extender setup easy. The setup process can be done in two ways i.e. Wireless Setup Method By WPS Button Manual Setup Method By Ethernet Cable Let’s discuss both of these setup methods one by one. Rockspace Wifi Extender Setup Via WPS Method: Initially, you need to press the reset button. To reset, use a pointed object and push the reset button. Make sure that your wifi extender is positioned in close vicinity to your wifi router at your home. You must ensure that the power supply is consistent and there are no fluctuations in it   Next, hit the WPS push button after waiting for a few minutes after switching it on. Wait for the WPS LED to turn solid green before
Read more