Steps To Perform The Rockspace Extender Setup Via re.rockspace.local

The Rockspace extender is compatible with almost every wifi router available out there. The Rockspace extender offers brilliant signal strength and network coverage in the bad recipient zones as well. It is capable of automatically shifting to a high-frequency band which relieves you of the worry of choosing the band frequency, manually. To enjoy such an advantage you need to do the Rockspace extender setup via re.rockspace.local. To set up your rockspace extender easily you just need to log onto re.rockspace.local and access all the settings from basic to advanced of the rockspace wifi range extender.  

A Step-By-Step Guide To Perform Rockspace Extender Setup Via re.rockspace.local:

  • To set up your Rockspace extender you must connect your internet-compatible device to the rockspace wifi network. It can be seen by the name of Rockspace_Ext in the available wifi networks list.
  • Now, launch any web browser or your preferred web browser and in its address bar enter the address re.rockspace.local and hit enter to launch the webpage. In case, the web address does not work then enter the IP address 192.168.0.254 in the address bar.
  • It is the default gateway address for the Rockspace wifi extender.
  • To continue with the login settings of the extender, you must input the desired password to create a log-in password.
  • After the login is complete the device will start scanning available networks in your range and you have to choose the network whose network and signal strength you want to enhance. 
  • After that, you have to input your existing wireless router’s password.
  • You may also alter the network name or SSID if you wish to.
  • A message prompt ‘Extended successfully’ will display on your screen after the setup process has been completed.
  • The two LED indicators present on the extender i.e Red and Blue indicate the possibility of a better network connection and the best possible network connection respectively.
  • If the LED indicator shows red color then you must try to place the extender close to the wifi router to have a better connection. 

A Step-By-Step Guide To Perform The Rockspace Extender Setup Via The WPS button:

  • Turn on the Rockspace wifi range extender and wait for the LED light to stop flashing and become stable.
  • The next step is to press the WPS push button on the Rockspace extender and push the WPS button on the Rockspace wifi extender within 2 minutes.
  • The LED light indicator will become stable and stop flickering if the connection is properly made.
  • Let the device be idle if the wireless router does not start.
  • Now, to make the WPS settings to the wifi router, navigate to the wifi router’s default web page. 
  • On that page, look for the settings menu and then choose it to open.
  • Allow the WPS connection by tapping on it.
  • After that, detach the wireless range extender and attach it again to the electrical socket near the wireless router to establish a better connection without any obstruction.

Concluding The Rockspace Extender Setup!

That’s how your Rockspace extender setup is complete by just doing a few steps at re.rockspace.local. You can make any basic to advanced configuration settings of the wireless range extender by visiting re.rockspace.local. You must keep in mind that the IP address,  192.168.0.254 can also be used in place of re.rockspace.local if the web address does not work. Now you can enjoy all the control over your wireless range extender. So you are all set to experience the hi-speed internet.

Location: New York, NY, USA

Comments

Post a Comment

Popular posts from this blog

Fascinating User Guide for Re.rockspace.local Setup Using the Web Interface

Image
  With so much development in the technology, several updates have been made in the extender that makes it better than before. Rockspace WiFi range extender is one of the ultimate extenders that comes with various models and speed. It is the device that helps you in extending the existing WiFi network and increase the WiFi range in the host WiFi network where they can’t reach. If you already purchased a Rockspace WiFi range extender and are looking for a simple user manual guide to setup your extender using re.rockspace.local without any network glitch then this blog will be helpful for you. There are two ways to set up the Rockspace WiFi range extender i.e. web interface and WPS button. In both ways, you need to be available physically near the local Rockspace signal booster to connect the existing host WiFi network. Let’s keep reading and know the steps to rockspace setup .  Guidelines for Rockspace Range Extender Setup Using Web Interface  For Rockspace WiFi range extender setup, y
Read more

Ultimate Guide for Users for Rockspace Extender Setup

Image
  Want to configure your Rockspace extender according to your desire? Well, after Rockspace extender setup , you can easily log into your extender and can make the changes into it depending on your needs. If you don’t know how to set up and login into your Rockspace range extender then this blog will help you. In this blog, we have discussed the simple and easiest guidelines on how to perform Rockspace Range Extender Setup on your device and login with the existing WiFi network. Scroll down and check out the steps to login to the Rockspace extender without facing any error.  Instructions for Rockspace Extender Setup Using the Ethernet Cable Look at the below instructions for setting up the Rockspace WiFi range extender using the Ethernet cable: Step 1: The first step is to connect the Rockspace WiFi extender to your computer or laptop using the Ethernet cable. Step 2: After that, launch the internet browser from your system. Thereafter, enter the login address of the Rockspace range e
Read more

Easy Guide To Rockspace WiFi Extender Setup

Image
Rockspace Wifi extender does a pretty good job in increasing the wifi strength and speed. To have the privilege of high-speed internet you have to do the Rockspace wifi extender setup . The Rockspace setup is not complicated. In this article, we will explain to you how you can make the Rockspace wifi extender setup easy. The setup process can be done in two ways i.e. Wireless Setup Method By WPS Button Manual Setup Method By Ethernet Cable Let’s discuss both of these setup methods one by one. Rockspace Wifi Extender Setup Via WPS Method: Initially, you need to press the reset button. To reset, use a pointed object and push the reset button. Make sure that your wifi extender is positioned in close vicinity to your wifi router at your home. You must ensure that the power supply is consistent and there are no fluctuations in it   Next, hit the WPS push button after waiting for a few minutes after switching it on. Wait for the WPS LED to turn solid green before
Read more