How Do I Fix Rockspace Extender Keeps Disconnecting?

 Rockspace extender setup is the ultimate choice to get the high-speed internet connection in your home or office. But what to do when it stops working or keeps disconnecting? Most of the people ask where to place the Rockspace range extender to get the uninterrupted WiFi signals and the internet throughout your home. Well, it is natural to have some issues with the re.rockspace.local WiFi range extender same as other extenders. If you are facing the same issues then you do not need to search further. In this blog, you will get to know the best troubleshooting tricks to resolve the Rockspace WiFi extender keeps disconnecting issue. 


Common Reasons Behind Re.rockspace.local Extender Keeps Disconnecting 

Look at the below list to know the most common reasons behind the Rockspace WiFi range extender keeps disconnecting issue:

  • Improper placement of the Rockspace range extender

  • Bugs, malicious files, viruses, server down or caches may cause the connectivity issues

  • Use of the outdated or corrupted firmware 

  • Rockspace extender might be connected to wrong WiFi network

  • Improper access of ap.setup web page 

  • Use of incompatible internet browser


Best Methods to Fix Rockspace Extender Keeps Disconnecting 

If you are facing the Rockspace range extender keeps disconnecting issue then go through the below methods one-by-one to resolve the issue:

Method 1: Reconnect Rockspace Range Extender 

One of the methods to fix the Rockspace range extender keeps disconnecting issue is to reconnect the extender with the wireless router. Here are the steps to do so:

  • Search for the WPS button on the wireless router. Once you find it, press the button for 10 seconds. 

  • Wait for some time until the extender light keeps flashing. Release the button when the light starts blinking and wait until your device is connected to the extender.

  • Thereafter, you will hear a beep sound which notifies you about the successful connection setup. 


Method 2: Connect Rockspace Extender to Computer

Another method to fix the Rockspace range extender keeps disconnecting is to connect the extender to the computer through Ethernet cable. Here are the steps to do so:

  • Take an Ethernet cable for establishing the connection.

  • Place your Rockspace extender nearer to the computer or laptop.

  • After that, connect one end of the wire to the computer and the other to the Rockspace extender device. 

  • Open any internet browser and manage the dashboard by accessing the re.rockspace.local web address. 

  • When the dashboard opens then it will ask you to follow the Rockspace extender setup process. 


 


Method 3: Power Cycle Home Router

Follow the below steps to power cycle the home router to resolve the issue with the extender:

  • The first step is to disconnect the router from the power socket.

  • After that, wait for some time and then reconnect the router to the electrical socket.

  • At last, check the connection. 


Method 4: Update the Firmware of the Rockspace Extender

You can fix the Rockspace WiFi range extender keeps disconnecting issues by updating the firmware to the latest available version. Look at these steps:

  • Firstly, open the Rockspace online webpage.

  • Once you log in, go to the Administrative tab.

  • Choose the firmware update option under the Administrative.

  • Next, you need to search for the latest firmware file and then download it on your system.

  • Run the file and complete the installation process. 


Well, these are some amazing methods that will help you in resolving the Rockspace extender setup keeps disconnecting issues. If you are unable to resolve the issue even after following the above steps then you can contact our helpline number to get help from our executives. 

Comments

Post a Comment

Popular posts from this blog

Fascinating User Guide for Re.rockspace.local Setup Using the Web Interface

Image
  With so much development in the technology, several updates have been made in the extender that makes it better than before. Rockspace WiFi range extender is one of the ultimate extenders that comes with various models and speed. It is the device that helps you in extending the existing WiFi network and increase the WiFi range in the host WiFi network where they can’t reach. If you already purchased a Rockspace WiFi range extender and are looking for a simple user manual guide to setup your extender using re.rockspace.local without any network glitch then this blog will be helpful for you. There are two ways to set up the Rockspace WiFi range extender i.e. web interface and WPS button. In both ways, you need to be available physically near the local Rockspace signal booster to connect the existing host WiFi network. Let’s keep reading and know the steps to rockspace setup .  Guidelines for Rockspace Range Extender Setup Using Web Interface  For Rockspace WiFi range extender setup, y
Read more

Ultimate Guide for Users for Rockspace Extender Setup

Image
  Want to configure your Rockspace extender according to your desire? Well, after Rockspace extender setup , you can easily log into your extender and can make the changes into it depending on your needs. If you don’t know how to set up and login into your Rockspace range extender then this blog will help you. In this blog, we have discussed the simple and easiest guidelines on how to perform Rockspace Range Extender Setup on your device and login with the existing WiFi network. Scroll down and check out the steps to login to the Rockspace extender without facing any error.  Instructions for Rockspace Extender Setup Using the Ethernet Cable Look at the below instructions for setting up the Rockspace WiFi range extender using the Ethernet cable: Step 1: The first step is to connect the Rockspace WiFi extender to your computer or laptop using the Ethernet cable. Step 2: After that, launch the internet browser from your system. Thereafter, enter the login address of the Rockspace range e
Read more

Easy Guide To Rockspace WiFi Extender Setup

Image
Rockspace Wifi extender does a pretty good job in increasing the wifi strength and speed. To have the privilege of high-speed internet you have to do the Rockspace wifi extender setup . The Rockspace setup is not complicated. In this article, we will explain to you how you can make the Rockspace wifi extender setup easy. The setup process can be done in two ways i.e. Wireless Setup Method By WPS Button Manual Setup Method By Ethernet Cable Let’s discuss both of these setup methods one by one. Rockspace Wifi Extender Setup Via WPS Method: Initially, you need to press the reset button. To reset, use a pointed object and push the reset button. Make sure that your wifi extender is positioned in close vicinity to your wifi router at your home. You must ensure that the power supply is consistent and there are no fluctuations in it   Next, hit the WPS push button after waiting for a few minutes after switching it on. Wait for the WPS LED to turn solid green before
Read more