How to Do Rockspace Extender Setup through re.rockspace.local?

 If you want to enjoy the ultimate signal strength and good network coverage then it is mandatory to perform Rockspace extender setup. You need to adjust the Rockspace extender to higher band frequency to get a good internet connection all around your home or office. But before this, one of the most important steps that you need to perform is the rockspace extender setup. The process of Rockspace extender setup is very easy and convenient. By accessing the re.rockspace.local web address, you can easily perform the Rockspace extender setup. In this blog, we have shared the instructions that help you in completing the Rockspace extender setup and all the configuration settings of the Rockspace extender. Keep reading and know how to set up the Rockspace extender. 


Steps for the Rockspace Extender Setup Using the Web Browser Method 

Follow the below steps for the Rockspace extender setup by using the web browser method:

Step 1: Firstly, connect your system to the Rockspace WiFi network. The name of the rockspace WiFi network is Rockspace_Ext. 

Step 2: After that, open any default web browser from your system. Type re.rockspace.local in the address bar of the web browser. Click on the enter button. 

Note: If the re.rockspace.local web address does not work for you then enter the IP address 192.168.0.254.

Step 3: Go ahead with the login and create a log-in password.

Step 4: Once you log in then your system will detect all the available networks in your area. You have to choose the WiFi network that you want to extend. 

Step 5: Enter the password for the WiFi network to proceed further.

Step 6: Next, you can modify the SSID or network key if you want.

Step 7: Now, you will see that  prompt will display on the screen saying “ extended successfully” which means that the setup process is completed. 

Step 8: The blue LED light on the extender implies that you have made the best connection. If the red LED light blinks then it means that there is scope to get a better connection. In case, red LED light is lit then move the extender near to the wireless router to get a better connection. 

            

Steps for Rockspace Extender Setup Using WPS Method

Go through the below steps for the Rockspace Extender Setup by using WPS method: 

Step 1: The first step is to turn on the Rockspace extender and wait for some time until the LED light becomes stable.

Step 2: After that, press the WPS button on the wireless extender.

Step 3: Within the next 2 minutes, you need to press the WPS button on the wireless router.

Step 4: If the devices are connected then you will see that the LED light will stop blinking and get stable.

Step 5: If the wireless router does not start then reset your device.

Step 6: For WPS setting, go to the web page of the WiFi router and then look for the settings menu.

Step 7: Choose the WPS option by tapping on it.

Step 8: At last, remove the WiFi extender and plug it into some other power outlet which is nearer to the wireless router.


We hope that both of the methods described above help you with the Rockspace extender setup. Both of the methods are simple and easy to carry out. You just need to have a consistent power supply and a stable internet connection during the extender setup.


Comments

Post a Comment

Popular posts from this blog

Fascinating User Guide for Re.rockspace.local Setup Using the Web Interface

Image
  With so much development in the technology, several updates have been made in the extender that makes it better than before. Rockspace WiFi range extender is one of the ultimate extenders that comes with various models and speed. It is the device that helps you in extending the existing WiFi network and increase the WiFi range in the host WiFi network where they can’t reach. If you already purchased a Rockspace WiFi range extender and are looking for a simple user manual guide to setup your extender using re.rockspace.local without any network glitch then this blog will be helpful for you. There are two ways to set up the Rockspace WiFi range extender i.e. web interface and WPS button. In both ways, you need to be available physically near the local Rockspace signal booster to connect the existing host WiFi network. Let’s keep reading and know the steps to rockspace setup .  Guidelines for Rockspace Range Extender Setup Using Web Interface  For Rockspace WiFi range extender setup, y
Read more

Ultimate Guide for Users for Rockspace Extender Setup

Image
  Want to configure your Rockspace extender according to your desire? Well, after Rockspace extender setup , you can easily log into your extender and can make the changes into it depending on your needs. If you don’t know how to set up and login into your Rockspace range extender then this blog will help you. In this blog, we have discussed the simple and easiest guidelines on how to perform Rockspace Range Extender Setup on your device and login with the existing WiFi network. Scroll down and check out the steps to login to the Rockspace extender without facing any error.  Instructions for Rockspace Extender Setup Using the Ethernet Cable Look at the below instructions for setting up the Rockspace WiFi range extender using the Ethernet cable: Step 1: The first step is to connect the Rockspace WiFi extender to your computer or laptop using the Ethernet cable. Step 2: After that, launch the internet browser from your system. Thereafter, enter the login address of the Rockspace range e
Read more

Easy Guide To Rockspace WiFi Extender Setup

Image
Rockspace Wifi extender does a pretty good job in increasing the wifi strength and speed. To have the privilege of high-speed internet you have to do the Rockspace wifi extender setup . The Rockspace setup is not complicated. In this article, we will explain to you how you can make the Rockspace wifi extender setup easy. The setup process can be done in two ways i.e. Wireless Setup Method By WPS Button Manual Setup Method By Ethernet Cable Let’s discuss both of these setup methods one by one. Rockspace Wifi Extender Setup Via WPS Method: Initially, you need to press the reset button. To reset, use a pointed object and push the reset button. Make sure that your wifi extender is positioned in close vicinity to your wifi router at your home. You must ensure that the power supply is consistent and there are no fluctuations in it   Next, hit the WPS push button after waiting for a few minutes after switching it on. Wait for the WPS LED to turn solid green before
Read more